- MENU -


Main Page


Tooling


Accu Chuck


Little Chucky


Marine 2002


Air Cooled Engines 2003


Wonder Wheel


Accu Deck


Accu Grind


Aluminum-Lube


Sunnen Repair Parts


Request Information

E-Mail


Instructions for proper us of
GROUND ZEROTM Tooling ___________________________________________________________

STEP 1

Position tool assembly on LW-8096 setting fixture with tool bit insert up against the end wall and the side with the part number against the two roll pins.


STEP 2


While holding tool assembly firmly in position loosen the allen set screw on right side of tool so that the spring loaded pin will pop out against the end wall - snug with allen wrench.


STEP 3


Be sure to double check that both the pin and the insert are touching the wall of the fixture while you are holding the tool against the wall. The use of a .001 shim to insure that the insert, then the pin both lock against the wall of the fixture is recommended.

STEP 4

Remove tool from fixture and position in your cylinder boring bar micrometer. Set the size as you would with a standard tool using the pin as the tool bit, Then, loosen screw holding the spring loaded pin. Push it back inside holder approx 1/8" and secure it with the set screw. Go ahead and bore.

NOTE: Be sure to test bore to check size - tool may not bore the same size as tools you are now using.

Back to Tooling Page

Lacey M. Williams, Lacey M Williams, Lacey Williams, Spray washers, cylinder hones, pressure testers, Kwik-Way, Valve Facers, Seat Grinders, Boring Bars, Cylinder Hones, Flywheel grinders, engine rebuilding equipment, power tools, engine rebuilding, equipment, specialty equipment, glass bead machines, cleaning compounds, honing oils, filtration systems, drill presses, lathes, milling machines, automotive repair, tools, shop supplies, shot blasters, brake deliners, cleaning equipment, precision measuring equipment, head rebuilding equipment, balancers, brake equipment, stones, repair parts, flywheel grinders, accu-chucks, boring stands, super 6 tools, accu-deck, tooling breake equipment, tooling glass beads, steel shot, cleaning compounds, valve guides, valve seats, pioneer engine parts, used equipment, reconditioned equipment">